This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
In the chart below are the actual measurements of this Filson item. The sketch shows where the measurements are taken so you can compare to products you already own.
Length
Measure from neck to bottom seam
Chest
Measure 1 inch below armhole
Sleeve
Measure spine to bottom of sleeve
incm
Length
Chest
Sleeve
XS
28 ½
42 ¾
34
S
29 ¾
45 ¾
35
M
30
48 ¾
36
L
31 ¼
51 ¾
37
XL
31 ½
54 ¾
37 ¾
XXL
32 ¾
57 ¾
38 ½
XXXL
33
60 ¾
39 ¼
Length
Chest
Sleeve
XS
72.39
108.59
86.36
S
75.57
116.21
88.9
M
76.2
123.83
91.44
L
79.38
131.45
93.98
XL
80.01
139.07
95.89
XXL
83.19
146.69
97.79
XXXL
83.82
154.31
99.7
Measurements are body measurements
X-Long Body Length: 1 1/2" longer than Regular length (Sizes M-XXL)
Upgraded for improved durability and sustainability with 100% recycled material.
While some situations call for a weather-resistant, heavy-duty shell that stands up to briars, brush and abrasion, our newly upgraded Swiftwater Rain Jacket is engineered for active uses that require lightweight, waterproof protection that can be pulled out in an instant.
The Swiftwater is very lightweight and packs into tight spaces, so it’s easy to stow in a backpack pocket or an upland hunting vest. The 2.5-layer shell fabric is made from 100% recycled 3.8-oz. ripstop nylon with a waterproof membrane laminated to its interior. The half-layer is a mesh grid printed on the interior that protects the membrane from abrasion and wear. During active, high-exertion use, breathability is just as important as waterproofness, so the waterproof membrane is full of microscopic pores that allow vapors and heat to escape while blocking all water entry. The Swiftwater is fully seam-sealed to provide unfailing protection in the wettest conditions.
To ensure that water stays on the outside, water-resistant AquaGuard® zippers from YKK® are used throughout. The front zipper features an interior storm flap and zipper garage to prevent neck-pinching. The Swiftwater is cut with plenty of room to add layers underneath in frigid weather, and features a two-way drawcord-adjustable hood to help seal out wind and water. Velcro®-adjustable cuffs provide a custom fit. For ease of storage, the Swiftwater is so compact it can be quickly rolled up into its hood.
The Swiftwater Rain Jacket provides waterproof protection that’s ready to pull out of your pack when the weather takes a turn.
FEATURES
Lightweight, packable and breathable
Waterproof and fully seam-sealed
YKK® AquaGuard® zippers
Front storm flap with zipper chin guard
Velcro®-adjustable cuffs
Two-way adjustable hood
SPECIFICATIONS
sku20248728
manufacturingImported.
MATERIAL & CARE
material3.8-oz. ripstop 100% nylon w/ membrane
careMachine wash cold, gentle cycle. Tumble dry low heat. Do not bleach. Do not iron.
SIZING & FIT
FIT INTENTFit intent is relaxed with room for medium to heavy layers underneathSize ExpectationsSize Guide